Logo

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

12.06.2025 07:24

What exactly is the difference between a surge protector and a fuse? Can a fuse protect the electronic devices from lightning instead of surge protector?

The third is lightning and “how it gets conducted into a home.”

This is an electronic circuit designed to clamp voltages so that the Voltage Potential that appears at the outlet is never going to exceed the nominal value.

This is 'the assistant's answer'

What was the most challenging shift you experienced as an ER physician? Can you describe the details and reasons behind it?

So, the voltage could go up to 500 volts, and the fuse will not open up.

a photo is worth a thousand words.

At least they know the answer if they wanted it.

Why do philosophy of physics when you can do physics itself? - Aeon

One

Barnstars:

In schematic diagrams this is the symbol for a fuse:

Willi Castro homers twice, Royce Lewis ends skid as Twins crush Athletics - Sports Illustrated

There are three different concepts here that are getting confused.

[old diagram got deleted by accident]

Fuses, on their own, then operate much slower than the MOV variable resistance, during the lightning strike.

Where are the big girls? This is the first time I've seen a bigger lady boy and that's awesome .. you should post more of them here, nothing wrong with a thick black lady

He then describes Rainy Season and Lightning.

Would individual surge supressors have save this equipment? most likely, since the surge supressor would take the jolt instead of the electronic components.

Upvotes:

If white people had been slaves, would WLM be a thing right now?

First Sentence:

This one hit behind the barn.

Because the load is inductive, the current lags the voltage.(by a bit).

Musk threatens to decommission a key space station link for NASA - AP News

A fuse is a non-resetable over current circuit protector.

2024–10–10[John johnson John Johnson ]

When the current is 200% of the rated value , it will “go open” (the link metal melts) and protect the device.

Why are white men so obsessed with Asian women? I'm friends with people from all different backgrounds but I never see my other non-white male friends obsess over or talk about Asian women like I've seen the white ones do.

There is no harm in having the surge suppressor along with the fuse in the circuit. The fuse will not open up until the current melts the link. This will take time, and in the interim, that jolt will get transmitted into the power supplies.

the problem then depends on "how fast does the fuse operate?".

A circuit breaker is similar, but is resettable.

James Bond game 007 First Light gets first trailer - The Verge

Now when you have a certain ac resistance, then a current flows in a loop.

“ A surge suppressor is the one which is connected at the input supply so that when there is a sudden change voltage it bypasses thereby protecting the (circuit) and electronic components”

The other is “what does a “fuse” do?”

Shortcuts is getting an AI-powered revamp; here’s what that could mean - 9to5Mac

But during the surge, the fuse will not blow if it is a longer duration and lower value )10 to 50%).

Here is a simplified AC power diagram.

This is the picture of an electronic coil of wire wound around a core of magnetic material.

England is launching a gonorrhea vaccine. Is Canada next? - Yahoo

“ A fuse is a device which protects the (circuit) against overload and short circuit.”

These are simplified answers to the original question, and does not change anything I wrote above.

What does a fuse do?

Yuen: When cancer struck a second time, she found ‘euphoria’ - Star Tribune

One is “what exactly is in a ‘surge protector’ ? ”

Is the question then , "why buy a surge supressor, if the fuse alone protects the electronic circuits from a lightning bolt?".

This is where the MOV conducts again, and dissipated the energy.

Dakota Johnson Realized This Outfit Mistake Mid-Interview — And Her Reaction Was Priceless - HuffPost

So combined with a device called a MOV or Metal-oxide-resistor, then forms the 3rd part of a “surge suppressor “.

This is where this question deviates from being a 'generic' question, and becomes more specific.

But it can get overloaded, and no longer works.

Wing and Walmart are bringing drone delivery to 100 new stores - The Verge

This is a high voltage low current spike that comes down the line because of the power poles being struck, and the voltage suppressors activating on the primary side of the transformer.

What is lightning?

Mohan forgets that a fuse is a one-time device, and needs to be replaced if it is tripped.

The Universe's Most Powerful Cosmic Rays May Finally Be Explained - ScienceAlert

He then asserts :

2024–10–00 [ Ammar Mahdi ] Ammar Mahdi

but I think this circuit , shows a few more pieces.

nine

It seems Mohan does not understand the difference between a comment and an Answer.

so, the loop of wire then, when put together with another loop reduces the ‘noise’ on a power line.

Once the voltage goes over 0.0650 volts, then this fact can be used to amplify the difference, and turn the circuit breaker off , furthur down the line. Essentially that is what a RCD/GFCI does, it compares the incoming current, to the outgoing current, and if the difference between the two currents is over 5mA, then it trips the circuit breaker.

P = e* I, so since I is 16 amps, then the voltage dropped is 1/16 volt or 0.0650 volts.

OK, this is Mohan Rajaratnam’s definition of a Surge suppressor.

(Dc diagram shown, AC is similar).

There are two important concepts here.

At one ohm, the resistor has a maximum of 1 watt power.

So, it’s possible that these devices from Trip Lite have addition suppression devices, these ones seem to be sturdy.

Edit 2024–10.

If the nominal power is 4,000 watts then the current at 230volts is 16 amps.

2024–10–11 [Bobby Sanchez Bobby Sanchez ].

I post the exact comment here.

These devices are installed between the “hot” and “neutral” and protective ground.

so, what happens?

but this device (an Inductor) … impedes the rapid changes in the current.

2024–09–27 [ Mohan Rajaratnam Mohan Rajaratnam ] . Thinks you can get free electricity from nothing : Mohan Rajaratnam's answer to Is it possible to generate free electricity at home using a magnet or other low-cost methods? If so, how does it work?

Lightning arrestor is a spark-gap device, and can be installed anywhere. What is important, is that the wire is thick enough to withstand the lightning bolt and conduct the energy away from the building.

2024–10–11 [Victor Olarewsju Victor Olarewaju ]

He then describes the function of a fuse.

At the secondary, it is 1000 times less.)turns ratio). If it gets hit with a 100,000 volt bolt of lightning then the voltage arrestors conduct and clamp the voltage down to line voltage, ( but a small amount leaks down the line). This is the problem.

This is a photo where a lightning bolt took out a home's complete mains distribution box, and a lot of electronic gear as well.

And this is the problem alone. Is the power supply in the equipmemt designed with a lightning strike in mind? Some yes, others, no.

This device then solves the entire problem.

But… the neutral is now “floating” because of the 1 ohm resistance.

It also is a device that limits the change in current flow.

Can the fuse protect the electronic devices from lightning instead of a surge protector.

The bolt then partially travels down the line to your home.

what exactly is a ‘surge’ protector?

[image of Common-mode choke]

eight

For this case there are devices called Metal oxide varistors (MOV).

An AC voltage/ current source, and an ac inductive load.

2024–10–14 [Omar Gharbi Omar Gharbi ]

2024–10–16 [ OO OLAOYE OYEBODE ]

It’s been three xxx five werks, and there has been no response to my follow on query on his Commment to my answer.

“ … to protect building, lightning arrestor, is provided above building and directly connected to earth.”

The MOV will conduct when the voltage exceeds 50% of line voltage.

(There is no concept of polarity, in the loop because the current changes direction 100 to 120 times a second (power frequency).